Hobby

New free flight glider coming soon.  900mm span, AUW 45-50g

£0.00
SKU Hobby
Out of stock

Cadet Seconds

If you would like this item shipped overseas please contact me here

The Cadet is a beginner’s free flight glider which flies well off a highstart towline or simply launched off a hill.  Simple construction, good for anyone new to the hobby wanting to have a go at an all balsa model with a built up wing.  Sturdy design means it can take a few knocks here and there and is easy to patch up.

Span 810mm

Kit includes

  • Laser cut balsa and plywood parts
  • All necessary strip wood
  • Asuka tissue for covering (optional)
  • Wire and nose weight
  • Printed plans and instructions

What you can expect

These may be slightly earlier versions of the model. 

The laser cutter may not have fully penetrated the balsa so parts may take longer to remove.

Balsa grading may be slightly off.

Accuracy should still be very good and there will be no missing parts.

Tissue not available with seconds.

OUT OF STOCK, seconds available

£34.50
SKU cadet-seconds
10 In Stock

Little Tern Seconds

If you would like this item shipped overseas please contact me here

A micro towline model for the more experienced builder.  This is a very small lightweight glider with a span of 450mm and an AUW of 6-8g (depending on covering material and balsa grade). Fly on the calmest warm evenings, using the thinnest rubber available to make your highstart towline with.

Span 450mm

Kit includes

  • Laser cut balsa and ply parts
  • All necessary strip wood
  • Asuka tissue for covering (optional)
  • Wire and nose weight
  • Printed plans

What you can expect

These may be slightly earlier versions of the model. 

The laser cutter may not have fully penetrated the balsa so parts may take longer to remove.

Balsa grading may be slightly off.

Accuracy should still be very good and there will be no missing parts.

Tissue not available with seconds.

OUT OF STOCK, seconds available

£11.50
SKU little-tern-seconds
14 In Stock

Cadet

If you would like this item shipped overseas please contact me here

The Cadet is a beginner’s free flight glider which flies well off a highstart towline or simply launched off a hill.  Simple construction, good for anyone new to the hobby wanting to have a go at an all balsa model with a built up wing.  Sturdy design means it can take a few knocks here and there and is easy to patch up.

Span 810mm

Kit includes

  • Laser cut balsa and plywood parts
  • All necessary strip wood
  • Asuka tissue for covering (optional)
  • Wire and nose weight
  • Printed plans and instructions

£42.50
SKU cadet
10 In Stock
* Tissue Covering:

Little Tern

If you would like this item shipped overseas please contact me here

A micro towline model for the more experienced builder.  This is a very small lightweight glider with a span of 450mm and an AUW of 6-8g (depending on covering material and balsa grade). Fly on the calmest warm evenings, using the thinnest rubber available to make your highstart towline with.

Span 450mm

Kit includes

  • Laser cut balsa and ply parts
  • All necessary strip wood
  • Asuka tissue for covering (optional)
  • Wire and nose weight
  • Printed plans
£16.50
SKU little-tern
21 In Stock
* Tissue Covering:

UTE

If you would like this item shipped overseas please contact me here

The UTE is a modified version of Frank Zaic’s Utility Special from 1937.  A very streamlined fast flying machine but with good endurance when set up correctly.  The freewheel prop and clean lines give it a good glide on the descent and a fairly long motor allows for a good run time. For more experienced builders with a good knowledge of flying rubber powered free flight models.

Span 600mm

Full Kit includes

  • Laser cut balsa and plywood parts
  • All necessary strip wood
  • All wire, tube and hardware
  • Printed plans and building instructions (rolled)

Not included in full kit

  • 10 x 10 square aluminium extrusion for jigging
  • Covering material
  • Balance weight
  • Rubber motor

Short Kit includes

  • All laser balsa and plywood parts
  • Printed plans and building instructions (folded)
  • Thrust bearing

Not included in short kit

  • 10 x 10 square aluminium extrusion for jigging
  • Strip wood of any kind
  • Wire and tubing
  • Covering material
  • Ballance weight
  • Rubber

£0.00
SKU UTE
12 In Stock
* UTE: